Llevel

SCPI Command :

P3PHase<*>:HARMonics:REFLevel<*>:ABSolute:LLEVel
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(power3PhaseMeas=Power3PhaseMeas.Default, refLevel=RefLevel.Default) → float[source]
# P3PHase<*>:HARMonics:REFLevel<*>:ABSolute:LLEVel
value: float = driver.p3Phase.harmonics.refLevel.absolute.llevel.get(power3PhaseMeas = repcap.Power3PhaseMeas.Default, refLevel = repcap.RefLevel.Default)

Sets the lower reference level in absolute values. This is required, e.g., to determine a fall.

Parameters:

  • power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Returns:

lower_level: -1E+26 to 1E+26

set(lower_level: float, power3PhaseMeas=Power3PhaseMeas.Default, refLevel=RefLevel.Default) → None[source]
# P3PHase<*>:HARMonics:REFLevel<*>:ABSolute:LLEVel
driver.p3Phase.harmonics.refLevel.absolute.llevel.set(lower_level = 1.0, power3PhaseMeas = repcap.Power3PhaseMeas.Default, refLevel = repcap.RefLevel.Default)

Sets the lower reference level in absolute values. This is required, e.g., to determine a fall.

Parameters:

  • lower_level – -1E+26 to 1E+26

  • power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)