Ulevel

SCPI Command :

P3PHase<*>:HARMonics:REFLevel<*>:ABSolute:ULEVel

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(power3PhaseMeas=Power3PhaseMeas.Default, refLevel=RefLevel.Default) → float[source]

# P3PHase<*>:HARMonics:REFLevel<*>:ABSolute:ULEVel
value: float = driver.p3Phase.harmonics.refLevel.absolute.ulevel.get(power3PhaseMeas = repcap.Power3PhaseMeas.Default, refLevel = repcap.RefLevel.Default)

Sets the upper reference level in absolute values. This is required to determine a rise.

Parameters:

power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)
refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Returns:

upper_level: -1E+26 to 1E+26

set(upper_level: float, power3PhaseMeas=Power3PhaseMeas.Default, refLevel=RefLevel.Default) → None[source]

# P3PHase<*>:HARMonics:REFLevel<*>:ABSolute:ULEVel
driver.p3Phase.harmonics.refLevel.absolute.ulevel.set(upper_level = 1.0, power3PhaseMeas = repcap.Power3PhaseMeas.Default, refLevel = repcap.RefLevel.Default)

Sets the upper reference level in absolute values. This is required to determine a rise.

Parameters:

upper_level – -1E+26 to 1E+26
power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)
refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)