Standard

SCPI Command :

P3PHase<*>:HARMonics:STANdard
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(power3PhaseMeas=Power3PhaseMeas.Default) → PwrHarmonicsStandard[source]
# P3PHase<*>:HARMonics:STANdard
value: enums.PwrHarmonicsStandard = driver.p3Phase.harmonics.standard.get(power3PhaseMeas = repcap.Power3PhaseMeas.Default)

Sets a standard for the current harmonic measurement.

Parameters:

power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)

Returns:

limits: ENA: EN 61000-3-2 Class A ENB: EN 61000-3-2 Class B ENC: EN 61000-3-2 Class C END: EN 61000-3-2 Class D

set(limits: PwrHarmonicsStandard, power3PhaseMeas=Power3PhaseMeas.Default) → None[source]
# P3PHase<*>:HARMonics:STANdard
driver.p3Phase.harmonics.standard.set(limits = enums.PwrHarmonicsStandard.ENA, power3PhaseMeas = repcap.Power3PhaseMeas.Default)

Sets a standard for the current harmonic measurement.

Parameters:

  • limits – ENA: EN 61000-3-2 Class A ENB: EN 61000-3-2 Class B ENC: EN 61000-3-2 Class C END: EN 61000-3-2 Class D

  • power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)