RefCurve<RefCurve>

SCPI Commands :

REFCurve<*>:CLEar
REFCurve<*>:SAVE
REFCurve<*>:OPEN
REFCurve<*>:ABORt

Commands in total: 25

Subgroups: 14

Direct child commands: 4

Repeated Capability Setting:

# Range: Nr1 .. Nr8

driver.refCurve.repcap_refCurve_set(repcap.RefCurve.Nr1)

abort(refCurve=RefCurve.Default) → None

# REFCurve<*>:ABORt
driver.refCurve.abort(refCurve = repcap.RefCurve.Default)

Aborts a running reference waveform export, which was started with method RsMxo.refCurve.save() , or a running reference waveform update, which was started with method RsMxo.refCurve.update.set() .

Parameters:

refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)

abort_and_wait(refCurve=RefCurve.Default, opc_timeout_ms: int = -1) → None

clear(refCurve=RefCurve.Default) → None

# REFCurve<*>:CLEar
driver.refCurve.clear(refCurve = repcap.RefCurve.Default)

Deletes the selected reference waveform. It disappears from the display, and its memory is deleted.

Parameters:

refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)

clear_and_wait(refCurve=RefCurve.Default, opc_timeout_ms: int = -1) → None

open(refCurve=RefCurve.Default) → None

# REFCurve<*>:OPEN
driver.refCurve.open(refCurve = repcap.RefCurve.Default)

Loads the reference waveform file selected by method RsMxo.refCurve.name.set() .

Parameters:

refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)

open_and_wait(refCurve=RefCurve.Default, opc_timeout_ms: int = -1) → None

save(refCurve=RefCurve.Default) → None

# REFCurve<*>:SAVE
driver.refCurve.save(refCurve = repcap.RefCurve.Default)

Saves the reference waveform to the file selected by method RsMxo.refCurve.name.set() .

Parameters:

refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)

save_and_wait(refCurve=RefCurve.Default, opc_timeout_ms: int = -1) → None

Cloning the Group

# Create a copy of the original group, that exists independently
refCurve_copy = driver.refCurve.clone()

Subgroups

• Axis
  • Xmode
• Data
  • Header
  • Stype
  • Values
• Hmode
• Name
• Offset
• Position
• Rescale
  • Horizontal
    • Factor
    • Offset
    • State
  • Vertical
    • Factor
    • Offset
    • State
• Restore
• Scale
• Source
• State
• ToOriginal
• Update
• Vmode