Hysteresis

SCPI Command :

P3PHase<*>:HARMonics:REFLevel<*>:ABSolute:HYSTeresis
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(power3PhaseMeas=Power3PhaseMeas.Default, refLevel=RefLevel.Default) → float[source]
# P3PHase<*>:HARMonics:REFLevel<*>:ABSolute:HYSTeresis
value: float = driver.p3Phase.harmonics.refLevel.absolute.hysteresis.get(power3PhaseMeas = repcap.Power3PhaseMeas.Default, refLevel = repcap.RefLevel.Default)

Defines a hysteresis for the middle reference level. A rise or fall from the middle reference value that does not exceed the hysteresis is rejected as noise.

Parameters:

  • power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Returns:

hyst_abs: 0 to 1E+26

set(hyst_abs: float, power3PhaseMeas=Power3PhaseMeas.Default, refLevel=RefLevel.Default) → None[source]
# P3PHase<*>:HARMonics:REFLevel<*>:ABSolute:HYSTeresis
driver.p3Phase.harmonics.refLevel.absolute.hysteresis.set(hyst_abs = 1.0, power3PhaseMeas = repcap.Power3PhaseMeas.Default, refLevel = repcap.RefLevel.Default)

Defines a hysteresis for the middle reference level. A rise or fall from the middle reference value that does not exceed the hysteresis is rejected as noise.

Parameters:

  • hyst_abs – 0 to 1E+26

  • power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)