Scale

SCPI Command :

SBUS<*>:UART:RX:SCALe

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(serialBus=SerialBus.Default) → float

# SBUS<*>:UART:RX:SCALe
value: float = driver.sbus.uart.rx.scale.get(serialBus = repcap.SerialBus.Default)

Set the vertical scale of the RX UART signal.

Parameters:

serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

set(rx_scale: float, serialBus=SerialBus.Default) → None

# SBUS<*>:UART:RX:SCALe
driver.sbus.uart.rx.scale.set(rx_scale = 1.0, serialBus = repcap.SerialBus.Default)

Set the vertical scale of the RX UART signal.

Parameters:

serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)