TypePy

SCPI Command :

SBUS<*>:TYPE
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(serialBus=SerialBus.Default) → ProtocolType[source]
# SBUS<*>:TYPE
value: enums.ProtocolType = driver.sbus.typePy.get(serialBus = repcap.SerialBus.Default)

Selects the bus type for analysis. The type of buses available depends on the installed options.

Parameters:

serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

Returns:

protocol_type: SPI: SPI protocol, see ‘SPI (option R&S MXO5-K510) ‘. QSPI: Quad SPI protocol, see ‘QUAD-SPI (option R&S MXO5-K510) ‘. I2C: I²C protocol, see ‘I²C (option R&S MXO5-K510) ‘. I3C: I3C protocol, see ‘I3C (option R&S MXO5-K550) ‘. UART: UART protocol, see ‘UART / RS-232 (option R&S MXO5- K510) ‘. NRZC: NRZ clocked protocol, see ‘NRZ Clocked (option R&S MXO5-K510) ‘. NRZU: NRZ unclocked protocol, see ‘NRZ Unclocked (option R&S MXO5-K510) ‘. MANC: Manchester protocol, see ‘Manchester (option R&S MXO5-K510) ‘ CAN: CAN protocol, see ‘CAN (option R&S MXO5-K520) ‘. LIN: LIN protocol, see ‘LIN (option R&S MXO5-K520) ‘. SENT: SENT protocol, see ‘SENT (option R&S MXO5-K520) ‘. ARIN429 | ARINc429: ARINC 429 protocol, see ‘ARINC 429 (option R&S MXO5-K530) ‘. MILS1553 | MILStd: MIL-1553 protocol, see ‘MIL-1553 (option R&S MXO5-K530) ‘. SWIR | SWIRe: SpaceWire protocol, see ‘SpaceWire (option R&S MXO5-K530) ‘. SPMI: SPMI protocol, see ‘SPMI (option R&S MXO5-K550) ‘. RFFE: RFFE protocol, see ‘RFFE (option R&S MXO5-K550) ‘. TNOS: Ethernet 10BASE-T1S protocol, see ‘10BASE-T1S (option R&S MXO5-K560) ‘. HBTO: Ethernet 100BASE-T1 protocol, see ‘100BASE-T1 (option R&S MXO5-K560) ‘. TBTO: Ethernet 1000BASE-T1 protocol, see ‘1000BASE-T1 (option R&S MXO5-K560) ‘. USB1 | USBLow | USBFull: USB 1.1 protocol, see ‘USB 1.1 (option R&S MXO5-K570) ‘ USB2 | USBHspeed: USB 2.0 protocol, see ‘USB 2.0 (option R&S MXO5-K570) ‘

set(protocol_type: ProtocolType, serialBus=SerialBus.Default) → None[source]
# SBUS<*>:TYPE
driver.sbus.typePy.set(protocol_type = enums.ProtocolType.ARIN429, serialBus = repcap.SerialBus.Default)

Selects the bus type for analysis. The type of buses available depends on the installed options.

Parameters:

  • protocol_type – SPI: SPI protocol, see ‘SPI (option R&S MXO5-K510) ‘. QSPI: Quad SPI protocol, see ‘QUAD-SPI (option R&S MXO5-K510) ‘. I2C: I²C protocol, see ‘I²C (option R&S MXO5-K510) ‘. I3C: I3C protocol, see ‘I3C (option R&S MXO5-K550) ‘. UART: UART protocol, see ‘UART / RS-232 (option R&S MXO5- K510) ‘. NRZC: NRZ clocked protocol, see ‘NRZ Clocked (option R&S MXO5-K510) ‘. NRZU: NRZ unclocked protocol, see ‘NRZ Unclocked (option R&S MXO5-K510) ‘. MANC: Manchester protocol, see ‘Manchester (option R&S MXO5-K510) ‘ CAN: CAN protocol, see ‘CAN (option R&S MXO5-K520) ‘. LIN: LIN protocol, see ‘LIN (option R&S MXO5-K520) ‘. SENT: SENT protocol, see ‘SENT (option R&S MXO5-K520) ‘. ARIN429 | ARINc429: ARINC 429 protocol, see ‘ARINC 429 (option R&S MXO5-K530) ‘. MILS1553 | MILStd: MIL-1553 protocol, see ‘MIL-1553 (option R&S MXO5-K530) ‘. SWIR | SWIRe: SpaceWire protocol, see ‘SpaceWire (option R&S MXO5-K530) ‘. SPMI: SPMI protocol, see ‘SPMI (option R&S MXO5-K550) ‘. RFFE: RFFE protocol, see ‘RFFE (option R&S MXO5-K550) ‘. TNOS: Ethernet 10BASE-T1S protocol, see ‘10BASE-T1S (option R&S MXO5-K560) ‘. HBTO: Ethernet 100BASE-T1 protocol, see ‘100BASE-T1 (option R&S MXO5-K560) ‘. TBTO: Ethernet 1000BASE-T1 protocol, see ‘1000BASE-T1 (option R&S MXO5-K560) ‘. USB1 | USBLow | USBFull: USB 1.1 protocol, see ‘USB 1.1 (option R&S MXO5-K570) ‘ USB2 | USBHspeed: USB 2.0 protocol, see ‘USB 2.0 (option R&S MXO5-K570) ‘

  • serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)