Parity

SCPI Command :

SBUS<*>:UART:PARity
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(serialBus=SerialBus.Default) → SbusUartParity[source]
# SBUS<*>:UART:PARity
value: enums.SbusUartParity = driver.sbus.uart.parity.get(serialBus = repcap.SerialBus.Default)

Defines the optional parity bit that is used for error detection.

Parameters:

serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

Returns:

parity: NONE | ODD | EVEN | MARK | SPC | DC

  • MARK: The parity bit is always a logic 1.

  • SPC: SPaCe: The parity bit is always a logic 0.

  • DC: Do not care: the parity is ignored.

set(parity: SbusUartParity, serialBus=SerialBus.Default) → None[source]
# SBUS<*>:UART:PARity
driver.sbus.uart.parity.set(parity = enums.SbusUartParity.DC, serialBus = repcap.SerialBus.Default)

Defines the optional parity bit that is used for error detection.

Parameters:

  • parity –

    NONE | ODD | EVEN | MARK | SPC | DC

    • MARK: The parity bit is always a logic 1.

    • SPC: SPaCe: The parity bit is always a logic 0.

    • DC: Do not care: the parity is ignored.

  • serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)