LaCycles

SCPI Command :

SBUS<*>:OSPI:OPCode:ITEM<*>:LACYcles
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(serialBus=SerialBus.Default, item=Item.Default) → int[source]
# SBUS<*>:OSPI:OPCode:ITEM<*>:LACYcles
value: int = driver.sbus.ospi.opCode.item.laCycles.get(serialBus = repcap.SerialBus.Default, item = repcap.Item.Default)

Sets the number of latancy cycles. Latency cycles are clock cycles inserted after the address or other command sequences but before data transfer begins.

Parameters:

  • serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

  • item – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Item’)

Returns:

latency_cycles: 0 to 255

set(latency_cycles: int, serialBus=SerialBus.Default, item=Item.Default) → None[source]
# SBUS<*>:OSPI:OPCode:ITEM<*>:LACYcles
driver.sbus.ospi.opCode.item.laCycles.set(latency_cycles = 1, serialBus = repcap.SerialBus.Default, item = repcap.Item.Default)

Sets the number of latancy cycles. Latency cycles are clock cycles inserted after the address or other command sequences but before data transfer begins.

Parameters:

  • latency_cycles – 0 to 255

  • serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

  • item – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Item’)