DtMode

SCPI Command :

SBUS<*>:OSPI:OPCode:ITEM<*>:DTMode

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(serialBus=SerialBus.Default, item=Item.Default) → SbusOspiMode

# SBUS<*>:OSPI:OPCode:ITEM<*>:DTMode
value: enums.SbusOspiMode = driver.sbus.ospi.opCode.item.dtMode.get(serialBus = repcap.SerialBus.Default, item = repcap.Item.Default)

Selects how many lines are used for the data transfer.

Parameters:

• serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

• item – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Item’)

Returns:

data_mode: WR1S | WR2S | WR4S | WR8S | WR1D | WR2D | WR4D | WR8D

• WR1S | WR2S | WR4S | WR8S: Number of lanes in single data rate mode

• WR1D | WR2D | WR4D | WR8D: Number of lanes in dual data rate mode

set(data_mode: SbusOspiMode, serialBus=SerialBus.Default, item=Item.Default) → None

# SBUS<*>:OSPI:OPCode:ITEM<*>:DTMode
driver.sbus.ospi.opCode.item.dtMode.set(data_mode = enums.SbusOspiMode.WR1D, serialBus = repcap.SerialBus.Default, item = repcap.Item.Default)

Selects how many lines are used for the data transfer.

Parameters:

• data_mode –

  WR1S | WR2S | WR4S | WR8S | WR1D | WR2D | WR4D | WR8D

  • WR1S | WR2S | WR4S | WR8S: Number of lanes in single data rate mode

  • WR1D | WR2D | WR4D | WR8D: Number of lanes in dual data rate mode

• serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

• item – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Item’)