State

SCPI Command :

SBUS<*>:I3C:FRAMe<*>:FLD<*>:STATe
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(serialBus=SerialBus.Default, frame=Frame.Default, field=Field.Default) → SbusI3cFrameState[source]
# SBUS<*>:I3C:FRAMe<*>:FLD<*>:STATe
value: enums.SbusI3cFrameState = driver.sbus.i3C.frame.fld.state.get(serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default, field = repcap.Field.Default)

Returns the overall state of the specified field for the selected frame.

Parameters:

  • serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

  • frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

  • field – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Fld’)

Returns:

state: OK | ACK | PAR | CRC | LENGth | UNKNown | INComplete

  • OK: The field has no error, it is valid.

  • ACK: Wrong acknowledgment (ACK) delimiter occurred.

  • PAR: Wrong parity detected.

  • CRC: Cyclic redundancy check failed.

  • LENGth: Wrong length of the field.

  • UNKNown: Unknown field type detected.

  • INComplete: The field is not completely contained in the acquisition. The acquired part of the field is usually valid, but cannot always be trusted.