Status

SCPI Command :

SBUS<*>:I3C:FRAMe<*>:STATus
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(serialBus=SerialBus.Default, frame=Frame.Default) → SbusI3cFrameState[source]
# SBUS<*>:I3C:FRAMe<*>:STATus
value: enums.SbusI3cFrameState = driver.sbus.i3C.frame.status.get(serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default)

Returns the overall state of the frame.

Parameters:

  • serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

  • frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

Returns:

frame_state: OK | ACK | PAR | CRC | LENGth | UNKNown | INComplete

  • OK: The frame is valid.

  • ACK: Wrong acknowledgment (ACK) delimiter occurred.

  • PAR: Wrong parity detected.

  • CRC: Cyclic redundancy check failed.

  • LENGth: Wrong length of frame.

  • UNKNown: Unknown frame type detected.

  • INComplete: The frame is not completely contained in the acquisition. The acquired part of the frame is usually valid, but cannot always be trusted.