Hysteresis

SCPI Command :

SBUS<*>:CAN:SIC:HYSTeresis

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(serialBus=SerialBus.Default) → float

# SBUS<*>:CAN:SIC:HYSTeresis
value: float = driver.sbus.can.sic.hysteresis.get(serialBus = repcap.SerialBus.Default)

Sets a hysteresis value for the SIC transceiver mode.

Parameters:

serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

set(hysteresis: float, serialBus=SerialBus.Default) → None

# SBUS<*>:CAN:SIC:HYSTeresis
driver.sbus.can.sic.hysteresis.set(hysteresis = 1.0, serialBus = repcap.SerialBus.Default)

Sets a hysteresis value for the SIC transceiver mode.

Parameters:

serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)