TypePy

SCPI Command :

SBUS<*>:CAN:TYPE

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(serialBus=SerialBus.Default) → SbusCanSignalType[source]

# SBUS<*>:CAN:TYPE
value: enums.SbusCanSignalType = driver.sbus.can.typePy.get(serialBus = repcap.SerialBus.Default)

Selects the CAN-High or CAN-Low line. Both lines are required for differential signal transmission used by CAN.

Parameters:: serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)
Returns:: signal_type: CANL | CANH

set(signal_type: SbusCanSignalType, serialBus=SerialBus.Default) → None[source]

# SBUS<*>:CAN:TYPE
driver.sbus.can.typePy.set(signal_type = enums.SbusCanSignalType.CANH, serialBus = repcap.SerialBus.Default)

Selects the CAN-High or CAN-Low line. Both lines are required for differential signal transmission used by CAN.

Parameters:

signal_type – CANL | CANH
serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)