ParA

SCPI Command :

SBUS<*>:CAN:FORMat:FRAMe<*>:FLD<*>:PARA

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(serialBus=SerialBus.Default, frame=Frame.Default, field=Field.Default) → float

# SBUS<*>:CAN:FORMat:FRAMe<*>:FLD<*>:PARA
value: float = driver.sbus.can.formatPy.frame.fld.parA.get(serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default, field = repcap.Field.Default)

Sets the parameters of the linear function. To configure the pulse, user the following commands:

• Parameter A: Slope (rate of change)

• Parameter B: Offset

Available if method RsMxo.sbus.can.formatPy.frame.fld.formatPy.set() = FLIN.

Parameters:

• serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

• frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

• field – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Fld’)

set(parameter_a: float, serialBus=SerialBus.Default, frame=Frame.Default, field=Field.Default) → None

# SBUS<*>:CAN:FORMat:FRAMe<*>:FLD<*>:PARA
driver.sbus.can.formatPy.frame.fld.parA.set(parameter_a = 1.0, serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default, field = repcap.Field.Default)

Sets the parameters of the linear function. To configure the pulse, user the following commands:

• Parameter A: Slope (rate of change)

• Parameter B: Offset

Available if method RsMxo.sbus.can.formatPy.frame.fld.formatPy.set() = FLIN.

Parameters:

• parameter_a – -1E+20 to 1E+20

• serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

• frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

• field – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Fld’)