Hysteresis

SCPI Command :

SBUS<*>:ARINc:THReshold:HYSTeresis

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(serialBus=SerialBus.Default) → float[source]

# SBUS<*>:ARINc:THReshold:HYSTeresis
value: float = driver.sbus.arinc.threshold.hysteresis.get(serialBus = repcap.SerialBus.Default)

Sets a hysteresis value.

Parameters:: serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

set(hysteresis: float, serialBus=SerialBus.Default) → None[source]

# SBUS<*>:ARINc:THReshold:HYSTeresis
driver.sbus.arinc.threshold.hysteresis.set(hysteresis = 1.0, serialBus = repcap.SerialBus.Default)

Sets a hysteresis value.

Parameters:: serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)