Polarity

SCPI Command :

SBUS<*>:ARINc:POLarity

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(serialBus=SerialBus.Default) → SbusArincPolarity[source]

# SBUS<*>:ARINc:POLarity
value: enums.SbusArincPolarity = driver.sbus.arinc.polarity.get(serialBus = repcap.SerialBus.Default)

Selects the wire on which the bus signal is measured : A Leg or B Leg. The setting affects the digitization of the signal.

Parameters:: serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)
Returns:: polarity: ALEG | BLEG

set(polarity: SbusArincPolarity, serialBus=SerialBus.Default) → None[source]

# SBUS<*>:ARINc:POLarity
driver.sbus.arinc.polarity.set(polarity = enums.SbusArincPolarity.ALEG, serialBus = repcap.SerialBus.Default)

Selects the wire on which the bus signal is measured : A Leg or B Leg. The setting affects the digitization of the signal.

Parameters:

polarity – ALEG | BLEG
serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)