DefProbe

SCPI Command :

PROBe<*>:SETup:ATTenuation:DEFProbe
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(probe=Probe.Default) → SelectProbe[source]
# PROBe<*>:SETup:ATTenuation:DEFProbe
value: enums.SelectProbe = driver.probe.setup.attenuation.defProbe.get(probe = repcap.Probe.Default)

Selects one of the predefined probes, or a user-defined probe.

Parameters:

probe – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Probe’)

set(select_predef_prb: SelectProbe, probe=Probe.Default) → None[source]
# PROBe<*>:SETup:ATTenuation:DEFProbe
driver.probe.setup.attenuation.defProbe.set(select_predef_prb = enums.SelectProbe.CMN50HF015, probe = repcap.Probe.Default)

Selects one of the predefined probes, or a user-defined probe.

Parameters:

  • select_predef_prb –

    NONE | ZC10 | ZC20 | ZC30 | ZD01A100 | ZD01A1000 | HZ15 | HZ17 | RTZ25C1 | ZZ80 | ZS10L | ZD02 | ZD08 | ZC02100 | ZC021000 | ZC03 | ZD002A10 | ZD002A100 | ZD003A20 | ZD003A200 | ZC3110 | ZC311 | ZC3101 | ZH03 | ZP1X | CWT15 | CWT30 | CWTMN1 | CMN50HF3 | CMN50HF15 | CMN50HF30 | CMN50HF015 | CMN50HF06 | CWTUM015 | CWTUM06 | CWTUM1 | V1V1 | V10V1 | V100V1 | V200V1 | V1000V1 | V1A1000 | V1A100 | V1A10 | V1A1 | USER

    • ZC10 | ZC20 | ZC30 | ZC03: Current probes

    • ZD02 | ZD08 | ZD01A100 | ZD01A1000 | ZD002A10 | ZD002A100 | ZD003A20 | ZD003A200: Active differential probes, attenuation ratio according to the setting on the probe.A100 = 100:1A1000 = 1000:1

    • HZ15 | HZ17: Near field probes (EMI)

    • ZC02100 | ZC021000 | ZC3110 | ZC311 | ZC3101: Current probes 100 A/V or 1000 A/V according to the setting on the probe.

    • CWT15 | CWT30 | CWTMN1 | CWTUM015 | CWTUM06 | CWTUM1 | CMN50HF3 | CMN50HF15 | CMN50HF30 | CMN50HF015 | CMN50HF06: PEM Rogowski probes

    • ZZ80 | ZH03 | ZP1X: Passive probes

    • V1V1 | V10V1 | V100V1 | V200V1 | V1000V1 | V1A1000 | V1A100 | V1A10 | V1A1: Common gain and attenuation settings if the probe type is not in the list.

    • USER: Probe is not detected and not known to the instrument. Set unit and attenuation manually.

  • probe – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Probe’)