Poffset

SCPI Command :

PROBe<*>:SETup:POFFset

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(probe=Probe.Default) → float

# PROBe<*>:SETup:POFFset
value: float = driver.probe.setup.poffset.get(probe = repcap.Probe.Default)

Sets the positive offset to compensate a DC voltage applied to the positive input terminal (Vp) referenced to ground.

Parameters:

probe – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Probe’)

Returns:

poffset: -1E+26 to 1E+26

set(poffset: float, probe=Probe.Default) → None

# PROBe<*>:SETup:POFFset
driver.probe.setup.poffset.set(poffset = 1.0, probe = repcap.Probe.Default)

Sets the positive offset to compensate a DC voltage applied to the positive input terminal (Vp) referenced to ground.

Parameters:

• poffset – -1E+26 to 1E+26

• probe – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Probe’)