Ulevel

SCPI Command :

POWer<*>:EFFiciency:OUTPut<*>:REFLevel<*>:ABSolute:ULEVel

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(power=Power.Default, output=Output.Default, refLevel=RefLevel.Default) → float

# POWer<*>:EFFiciency:OUTPut<*>:REFLevel<*>:ABSolute:ULEVel
value: float = driver.power.efficiency.output.refLevel.absolute.ulevel.get(power = repcap.Power.Default, output = repcap.Output.Default, refLevel = repcap.RefLevel.Default)

Sets the upper reference level in absolute values. This is required to determine a rise.

Parameters:

• power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

• output – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)

• refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Returns:

upper_level: -1E+26 to 1E+26

set(upper_level: float, power=Power.Default, output=Output.Default, refLevel=RefLevel.Default) → None

# POWer<*>:EFFiciency:OUTPut<*>:REFLevel<*>:ABSolute:ULEVel
driver.power.efficiency.output.refLevel.absolute.ulevel.set(upper_level = 1.0, power = repcap.Power.Default, output = repcap.Output.Default, refLevel = repcap.RefLevel.Default)

Sets the upper reference level in absolute values. This is required to determine a rise.

Parameters:

• upper_level – -1E+26 to 1E+26

• power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

• output – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)

• refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)