Hysteresis

SCPI Command :

POWer<*>:EFFiciency:OUTPut<*>:REFLevel<*>:ABSolute:HYSTeresis

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(power=Power.Default, output=Output.Default, refLevel=RefLevel.Default) → float

# POWer<*>:EFFiciency:OUTPut<*>:REFLevel<*>:ABSolute:HYSTeresis
value: float = driver.power.efficiency.output.refLevel.absolute.hysteresis.get(power = repcap.Power.Default, output = repcap.Output.Default, refLevel = repcap.RefLevel.Default)

Defines a hysteresis for the middle reference level. A rise or fall from the middle reference value that does not exceed the hysteresis is rejected as noise.

Parameters:

• power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

• output – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)

• refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Returns:

hyst_abs: 0 to 1E+26

set(hyst_abs: float, power=Power.Default, output=Output.Default, refLevel=RefLevel.Default) → None

# POWer<*>:EFFiciency:OUTPut<*>:REFLevel<*>:ABSolute:HYSTeresis
driver.power.efficiency.output.refLevel.absolute.hysteresis.set(hyst_abs = 1.0, power = repcap.Power.Default, output = repcap.Output.Default, refLevel = repcap.RefLevel.Default)

Defines a hysteresis for the middle reference level. A rise or fall from the middle reference value that does not exceed the hysteresis is rejected as noise.

Parameters:

• hyst_abs – 0 to 1E+26

• power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

• output – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)

• refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)