Llevel

SCPI Command :

POWer<*>:EFFiciency:OUTPut<*>:REFLevel<*>:ABSolute:LLEVel
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(power=Power.Default, output=Output.Default, refLevel=RefLevel.Default) → float[source]
# POWer<*>:EFFiciency:OUTPut<*>:REFLevel<*>:ABSolute:LLEVel
value: float = driver.power.efficiency.output.refLevel.absolute.llevel.get(power = repcap.Power.Default, output = repcap.Output.Default, refLevel = repcap.RefLevel.Default)

Sets the lower reference level in absolute values. This is required, e.g., to determine a fall.

Parameters:

  • power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

  • output – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Returns:

lower_level: -1E+26 to 1E+26

set(lower_level: float, power=Power.Default, output=Output.Default, refLevel=RefLevel.Default) → None[source]
# POWer<*>:EFFiciency:OUTPut<*>:REFLevel<*>:ABSolute:LLEVel
driver.power.efficiency.output.refLevel.absolute.llevel.set(lower_level = 1.0, power = repcap.Power.Default, output = repcap.Output.Default, refLevel = repcap.RefLevel.Default)

Sets the lower reference level in absolute values. This is required, e.g., to determine a fall.

Parameters:

  • lower_level – -1E+26 to 1E+26

  • power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

  • output – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)