RefLevel

SCPI Command :

TREFerence<*>:CLK:REFLevel

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(timingReference=TimingReference.Default) → ReferenceLevel

# TREFerence<*>:CLK:REFLevel
value: enums.ReferenceLevel = driver.treference.clk.refLevel.get(timingReference = repcap.TimingReference.Default)

Selects the reference level that is used for the timing reference if the indicated timing reference uses an explicit click signal.

Parameters:

timingReference – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Treference’)

Returns:

reference_level: UPPer | MIDDle | LOWer

set(reference_level: ReferenceLevel, timingReference=TimingReference.Default) → None

# TREFerence<*>:CLK:REFLevel
driver.treference.clk.refLevel.set(reference_level = enums.ReferenceLevel.LOWer, timingReference = repcap.TimingReference.Default)

Selects the reference level that is used for the timing reference if the indicated timing reference uses an explicit click signal.

Parameters:

• reference_level – UPPer | MIDDle | LOWer

• timingReference – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Treference’)