Factor

SCPI Command :

TREFerence<*>:CLK:FACTor

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(timingReference=TimingReference.Default) → int

# TREFerence<*>:CLK:FACTor
value: int = driver.treference.clk.factor.get(timingReference = repcap.TimingReference.Default)

Sets a value for the clock multiplier if method RsMxo.treference.typePy.set() is set. The muliplier is the ratio of an internal clock rate to the externally supplied clock. It defines the number of samples per clock interval.

Parameters:

timingReference – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Treference’)

Returns:

multiplier: 1 to 100

set(multiplier: int, timingReference=TimingReference.Default) → None

# TREFerence<*>:CLK:FACTor
driver.treference.clk.factor.set(multiplier = 1, timingReference = repcap.TimingReference.Default)

Sets a value for the clock multiplier if method RsMxo.treference.typePy.set() is set. The muliplier is the ratio of an internal clock rate to the externally supplied clock. It defines the number of samples per clock interval.

Parameters:

• multiplier – 1 to 100

• timingReference – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Treference’)