Hysteresis

SCPI Command :

SBUS<*>:USBone:DMINus:HYSTeresis

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(serialBus=SerialBus.Default) → float[source]

# SBUS<*>:USBone:DMINus:HYSTeresis
value: float = driver.sbus.usbOne.dminus.hysteresis.get(serialBus = repcap.SerialBus.Default)

Sets a hysteresis value for the D- line.

Parameters:: serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

set(dminus_hyst: float, serialBus=SerialBus.Default) → None[source]

# SBUS<*>:USBone:DMINus:HYSTeresis
driver.sbus.usbOne.dminus.hysteresis.set(dminus_hyst = 1.0, serialBus = repcap.SerialBus.Default)

Sets a hysteresis value for the D- line.

Parameters:: serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)