Imax

SCPI Command :

SBUS<*>:USBHspeed:FILTer:FRAMe<*>:FLD<*>:IMAX

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(serialBus=SerialBus.Default, frame=Frame.Default, field=Field.Default) → int

# SBUS<*>:USBHspeed:FILTer:FRAMe<*>:FLD<*>:IMAX
value: int = driver.sbus.usbHspeed.filterPy.frame.fld.imax.get(serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default, field = repcap.Field.Default)

Sets the end value of an index range if the operator is set to INRange. You can set the operator with method RsMxo.sbus.usbHspeed.filterPy.frame.fld.ioperator.set() .

Parameters:

• serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

• frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

• field – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Fld’)

Returns:

index_max: 1 to 65535

set(index_max: int, serialBus=SerialBus.Default, frame=Frame.Default, field=Field.Default) → None

# SBUS<*>:USBHspeed:FILTer:FRAMe<*>:FLD<*>:IMAX
driver.sbus.usbHspeed.filterPy.frame.fld.imax.set(index_max = 1, serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default, field = repcap.Field.Default)

Sets the end value of an index range if the operator is set to INRange. You can set the operator with method RsMxo.sbus.usbHspeed.filterPy.frame.fld.ioperator.set() .

Parameters:

• index_max – 1 to 65535

• serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

• frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

• field – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Fld’)