Enable

SCPI Command :

SBUS<*>:TNOS:FILTer:FRAMe<*>:FLD<*>:ENABle
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(serialBus=SerialBus.Default, frame=Frame.Default, field=Field.Default) → bool[source]
# SBUS<*>:TNOS:FILTer:FRAMe<*>:FLD<*>:ENABle
value: bool = driver.sbus.tnos.filterPy.frame.fld.enable.get(serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default, field = repcap.Field.Default)

Enables or disables the checking condition for the selected field of the selected frame.

Parameters:

  • serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

  • frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

  • field – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Fld’)

Returns:

cond_enabler: OFF | ON

set(cond_enabler: bool, serialBus=SerialBus.Default, frame=Frame.Default, field=Field.Default) → None[source]
# SBUS<*>:TNOS:FILTer:FRAMe<*>:FLD<*>:ENABle
driver.sbus.tnos.filterPy.frame.fld.enable.set(cond_enabler = False, serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default, field = repcap.Field.Default)

Enables or disables the checking condition for the selected field of the selected frame.

Parameters:

  • cond_enabler – OFF | ON

  • serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

  • frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

  • field – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Fld’)