Repetition

SCPI Command :

SBUS<*>:SPMI:FORMat:FRAMe<*>:FLD<*>:REPetition

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(serialBus=SerialBus.Default, frame=Frame.Default, field=Field.Default) → int

# SBUS<*>:SPMI:FORMat:FRAMe<*>:FLD<*>:REPetition
value: int = driver.sbus.spmi.formatPy.frame.fld.repetition.get(serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default, field = repcap.Field.Default)

Sets the repetition count of the field. Setting the value to 0 indicates an unlimited repetition that continues until the end of the payload is reached.

Parameters:

• serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

• frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

• field – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Fld’)

Returns:

repetition: 0 to 65535

set(repetition: int, serialBus=SerialBus.Default, frame=Frame.Default, field=Field.Default) → None

# SBUS<*>:SPMI:FORMat:FRAMe<*>:FLD<*>:REPetition
driver.sbus.spmi.formatPy.frame.fld.repetition.set(repetition = 1, serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default, field = repcap.Field.Default)

Sets the repetition count of the field. Setting the value to 0 indicates an unlimited repetition that continues until the end of the payload is reached.

Parameters:

• repetition – 0 to 65535

• serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

• frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

• field – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Fld’)