Dmax

SCPI Command :

SBUS<*>:QSPI:FILTer:FRAMe<*>:FLD<*>:DMAX
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(serialBus=SerialBus.Default, frame=Frame.Default, field=Field.Default) → List[int][source]
# SBUS<*>:QSPI:FILTer:FRAMe<*>:FLD<*>:DMAX
value: List[int] = driver.sbus.qspi.filterPy.frame.fld.dmax.get(serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default, field = repcap.Field.Default)

Sets the end value of a data pattern range if the operator is set to INRange or OORANGe.

Parameters:

  • serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

  • frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

  • field – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Fld’)

set(data_max: List[int], serialBus=SerialBus.Default, frame=Frame.Default, field=Field.Default) → None[source]
# SBUS<*>:QSPI:FILTer:FRAMe<*>:FLD<*>:DMAX
driver.sbus.qspi.filterPy.frame.fld.dmax.set(data_max = [1, 2, 3], serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default, field = repcap.Field.Default)

Sets the end value of a data pattern range if the operator is set to INRange or OORANGe.

Parameters:

  • serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

  • frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

  • field – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Fld’)