Dmin

SCPI Command :

SBUS<*>:MANCh:FILTer:FRAMe<*>:FLD<*>:DMIN
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(serialBus=SerialBus.Default, frame=Frame.Default, field=Field.Default) → List[int][source]
# SBUS<*>:MANCh:FILTer:FRAMe<*>:FLD<*>:DMIN
value: List[int] = driver.sbus.manch.filterPy.frame.fld.dmin.get(serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default, field = repcap.Field.Default)

Specifies the data pattern, or sets the start value of a data pattern range.

Parameters:

  • serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

  • frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

  • field – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Fld’)

set(data_min: List[int], serialBus=SerialBus.Default, frame=Frame.Default, field=Field.Default) → None[source]
# SBUS<*>:MANCh:FILTer:FRAMe<*>:FLD<*>:DMIN
driver.sbus.manch.filterPy.frame.fld.dmin.set(data_min = [1, 2, 3], serialBus = repcap.SerialBus.Default, frame = repcap.Frame.Default, field = repcap.Field.Default)

Specifies the data pattern, or sets the start value of a data pattern range.

Parameters:

  • serialBus – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sbus’)

  • frame – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Frame’)

  • field – optional repeated capability selector. Default value: Ix1 (settable in the interface ‘Fld’)