Llevel

SCPI Command :

REFLevel<*>:ABSolute:LLEVel

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(refLevel=RefLevel.Default) → float[source]

# REFLevel<*>:ABSolute:LLEVel
value: float = driver.refLevel.absolute.llevel.get(refLevel = repcap.RefLevel.Default)

Sets the lower reference level in absolute values. This is required, e.g., to determine a fall.

Parameters:: refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)
Returns:: lower_level: -1E+26 to 1E+26

set(lower_level: float, refLevel=RefLevel.Default) → None[source]

# REFLevel<*>:ABSolute:LLEVel
driver.refLevel.absolute.llevel.set(lower_level = 1.0, refLevel = repcap.RefLevel.Default)

Sets the lower reference level in absolute values. This is required, e.g., to determine a fall.

Parameters:

lower_level – -1E+26 to 1E+26
refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)