Hysteresis

SCPI Command :

REFLevel<*>:ABSolute:HYSTeresis

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(refLevel=RefLevel.Default) → float[source]

# REFLevel<*>:ABSolute:HYSTeresis
value: float = driver.refLevel.absolute.hysteresis.get(refLevel = repcap.RefLevel.Default)

Defines a hysteresis for the middle reference level. A rise or fall from the middle reference value that does not exceed the hysteresis is rejected as noise.

Parameters:: refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)
Returns:: hyst_abs: 0 to 1E+26

set(hyst_abs: float, refLevel=RefLevel.Default) → None[source]

# REFLevel<*>:ABSolute:HYSTeresis
driver.refLevel.absolute.hysteresis.set(hyst_abs = 1.0, refLevel = repcap.RefLevel.Default)

Defines a hysteresis for the middle reference level. A rise or fall from the middle reference value that does not exceed the hysteresis is rejected as noise.

Parameters:

hyst_abs – 0 to 1E+26
refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)