Voltage

SCPI Command :

POWer<*>:QUALity:SOURce[:VOLTage]

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(power=Power.Default) → SignalSource

# POWer<*>:QUALity:SOURce[:VOLTage]
value: enums.SignalSource = driver.power.quality.source.voltage.get(power = repcap.Power.Default)

Selects the voltage source waveform. Analog channels and math waveforms can be used.

Parameters:

power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

set(source_voltage: SignalSource, power=Power.Default) → None

# POWer<*>:QUALity:SOURce[:VOLTage]
driver.power.quality.source.voltage.set(source_voltage = enums.SignalSource.C1, power = repcap.Power.Default)

Selects the voltage source waveform. Analog channels and math waveforms can be used.

Parameters:

• source_voltage – C1 | C2 | … | C8 | M1 | M2 | … | M8

• power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)