Gate

SCPI Command :

POWer<*>:QUALity:GATE

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(power=Power.Default) → int

# POWer<*>:QUALity:GATE
value: int = driver.power.quality.gate.get(power = repcap.Power.Default)

Selects the gate that is used for limiting the range of the power quality measurement. Enable the gate before you assign a measurement to it (method RsMxo.gate.enable.set() =ON) .

Parameters:

power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

Returns:

gate: Number of the gate to be used

set(gate: int, power=Power.Default) → None

# POWer<*>:QUALity:GATE
driver.power.quality.gate.set(gate = 1, power = repcap.Power.Default)

Selects the gate that is used for limiting the range of the power quality measurement. Enable the gate before you assign a measurement to it (method RsMxo.gate.enable.set() =ON) .

Parameters:

• gate – Number of the gate to be used

• power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)