Mil

SCPI Command :

POWer<*>:HARMonics:FREQuency:MIL
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(power=Power.Default) → FundamentalFreqMil[source]
# POWer<*>:HARMonics:FREQuency:MIL
value: enums.FundamentalFreqMil = driver.power.harmonics.frequency.mil.get(power = repcap.Power.Default)

Sets the fundamental frequency of the input signal for the MIL standard, if method RsMxo.power.harmonics.standard.set() is set to MIL.

Parameters:

power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

set(fundamental_freq_mil: FundamentalFreqMil, power=Power.Default) → None[source]
# POWer<*>:HARMonics:FREQuency:MIL
driver.power.harmonics.frequency.mil.set(fundamental_freq_mil = enums.FundamentalFreqMil.F400, power = repcap.Power.Default)

Sets the fundamental frequency of the input signal for the MIL standard, if method RsMxo.power.harmonics.standard.set() is set to MIL.

Parameters:

  • fundamental_freq_mil – F60: 60 Hz F400: 400 Hz

  • power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)