En

SCPI Command :

POWer<*>:HARMonics:FREQuency:EN
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(power=Power.Default) → FundamentalFreqEn61000[source]
# POWer<*>:HARMonics:FREQuency:EN
value: enums.FundamentalFreqEn61000 = driver.power.harmonics.frequency.en.get(power = repcap.Power.Default)

Sets the fundamental frequency of the input signal for the EN61000 standard, if method RsMxo.power.harmonics.standard.set() is set to ENA / ENB / ENC / END.

Parameters:

power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

set(fundamental_freq_en_61000: FundamentalFreqEn61000, power=Power.Default) → None[source]
# POWer<*>:HARMonics:FREQuency:EN
driver.power.harmonics.frequency.en.set(fundamental_freq_en_61000 = enums.FundamentalFreqEn61000.AUTO, power = repcap.Power.Default)

Sets the fundamental frequency of the input signal for the EN61000 standard, if method RsMxo.power.harmonics.standard.set() is set to ENA / ENB / ENC / END.

Parameters:

  • fundamental_freq_en_61000 – F50: 50 Hz F60: 60 Hz AUTO: automatically set

  • power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)