Lower

SCPI Command :

POWer<*>:EFFiciency:INPut:REFLevel<*>:RELative:LOWer
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(power=Power.Default, refLevel=RefLevel.Default) → float[source]
# POWer<*>:EFFiciency:INPut:REFLevel<*>:RELative:LOWer
value: float = driver.power.efficiency.inputPy.refLevel.relative.lower.get(power = repcap.Power.Default, refLevel = repcap.RefLevel.Default)

Sets the lower relative reference level if method RsMxo.power.quality.refLevel.relative.mode.set() is set to USER.

Parameters:

  • power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Returns:

low_ref_lev_rel: -100 to 200

set(low_ref_lev_rel: float, power=Power.Default, refLevel=RefLevel.Default) → None[source]
# POWer<*>:EFFiciency:INPut:REFLevel<*>:RELative:LOWer
driver.power.efficiency.inputPy.refLevel.relative.lower.set(low_ref_lev_rel = 1.0, power = repcap.Power.Default, refLevel = repcap.RefLevel.Default)

Sets the lower relative reference level if method RsMxo.power.quality.refLevel.relative.mode.set() is set to USER.

Parameters:

  • low_ref_lev_rel – -100 to 200

  • power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)