Wiring

SCPI Command :

P3PHase<*>:HARMonics:SOURce:WIRing

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(power3PhaseMeas=Power3PhaseMeas.Default) → P3PhaseSourceWiring[source]

# P3PHase<*>:HARMonics:SOURce:WIRing
value: enums.P3PhaseSourceWiring = driver.p3Phase.harmonics.source.wiring.get(power3PhaseMeas = repcap.Power3PhaseMeas.Default)

Configures how your probes are connected to the three-phase device. It allows you to visualize the connections for proper setup. If you can only measure on four channels, select the W2V2A wiring.

Parameters:: power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)
Returns:: wiring: W2V2A | W3V3A | W3VN3A

set(wiring: P3PhaseSourceWiring, power3PhaseMeas=Power3PhaseMeas.Default) → None[source]

# P3PHase<*>:HARMonics:SOURce:WIRing
driver.p3Phase.harmonics.source.wiring.set(wiring = enums.P3PhaseSourceWiring.W2V2A, power3PhaseMeas = repcap.Power3PhaseMeas.Default)

Configures how your probes are connected to the three-phase device. It allows you to visualize the connections for proper setup. If you can only measure on four channels, select the W2V2A wiring.

Parameters:

wiring – W2V2A | W3V3A | W3VN3A
power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)