Mode

SCPI Command :

P3PHase<*>:HARMonics:RPOWer:MODE

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(power3PhaseMeas=Power3PhaseMeas.Default) → AutoUser

# P3PHase<*>:HARMonics:RPOWer:MODE
value: enums.AutoUser = driver.p3Phase.harmonics.rpower.mode.get(power3PhaseMeas = repcap.Power3PhaseMeas.Default)

Available if method RsMxo.p3Phase.harmonics.standard.set() is set to END. Selects if the power factor is defined automatically, or a user-defined value is used (method RsMxo.p3Phase.harmonics.rpower.user.set() ) .

Parameters:

power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)

Returns:

act_pow_mode: AUTO | USER

set(act_pow_mode: AutoUser, power3PhaseMeas=Power3PhaseMeas.Default) → None

# P3PHase<*>:HARMonics:RPOWer:MODE
driver.p3Phase.harmonics.rpower.mode.set(act_pow_mode = enums.AutoUser.AUTO, power3PhaseMeas = repcap.Power3PhaseMeas.Default)

Available if method RsMxo.p3Phase.harmonics.standard.set() is set to END. Selects if the power factor is defined automatically, or a user-defined value is used (method RsMxo.p3Phase.harmonics.rpower.user.set() ) .

Parameters:

• act_pow_mode – AUTO | USER

• power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)