Mode

SCPI Command :

P3PHase<*>:HARMonics:REFLevel<*>:RELative:MODE
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(power3PhaseMeas=Power3PhaseMeas.Default, refLevel=RefLevel.Default) → RelativeLevels[source]
# P3PHase<*>:HARMonics:REFLevel<*>:RELative:MODE
value: enums.RelativeLevels = driver.p3Phase.harmonics.refLevel.relative.mode.get(power3PhaseMeas = repcap.Power3PhaseMeas.Default, refLevel = repcap.RefLevel.Default)

The lower, middle and upper reference levels, defined as percentages of the high signal level.

Parameters:

  • power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Returns:

relative_levels: FIVE | TEN | TWENty | USER

  • FIVE: 5/50/95

  • TEN: 10/50/90

  • TWENty: 20/50/80

  • USER: Set the reference levels to individual values withP3PHasem:HARMonics:REFLevelrl:RELative:LOWer, P3PHasem:HARMonics:REFLevelrl:RELative:MIDDle, and P3PHasem:HARMonics:REFLevelrl:RELative:UPPer.

set(relative_levels: RelativeLevels, power3PhaseMeas=Power3PhaseMeas.Default, refLevel=RefLevel.Default) → None[source]
# P3PHase<*>:HARMonics:REFLevel<*>:RELative:MODE
driver.p3Phase.harmonics.refLevel.relative.mode.set(relative_levels = enums.RelativeLevels.FIVE, power3PhaseMeas = repcap.Power3PhaseMeas.Default, refLevel = repcap.RefLevel.Default)

The lower, middle and upper reference levels, defined as percentages of the high signal level.

Parameters:

  • relative_levels –

    FIVE | TEN | TWENty | USER

    • FIVE: 5/50/95

    • TEN: 10/50/90

    • TWENty: 20/50/80

    • USER: Set the reference levels to individual values withP3PHasem:HARMonics:REFLevelrl:RELative:LOWer, P3PHasem:HARMonics:REFLevelrl:RELative:MIDDle, and P3PHasem:HARMonics:REFLevelrl:RELative:UPPer.

  • power3PhaseMeas – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘P3Phase’)

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)