RefLevel<RefLevel>

SCPI Command :

MEASurement<*>:JITTer:REFLevel<*>
Commands in total: 1
Subgroups: 0
Direct child commands: 1

Repeated Capability Setting:

# Range: Nr1 .. Nr2

driver.measurement.jitter.refLevel.repcap_refLevel_set(repcap.RefLevel.Nr1)
get(measIndex=MeasIndex.Default, refLevel=RefLevel.Default) → ReferenceLevel[source]
# MEASurement<*>:JITTer:REFLevel<*>
value: enums.ReferenceLevel = driver.measurement.jitter.refLevel.get(measIndex = repcap.MeasIndex.Default, refLevel = repcap.RefLevel.Default)

Selects the reference level that is used for the measurement and for the indicated measurement source. Each source of the measurement can have its own reference level .

Parameters:

  • measIndex – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Returns:

reference_level: UPPer | MIDDle | LOWer

set(reference_level: ReferenceLevel, measIndex=MeasIndex.Default, refLevel=RefLevel.Default) → None[source]
# MEASurement<*>:JITTer:REFLevel<*>
driver.measurement.jitter.refLevel.set(reference_level = enums.ReferenceLevel.LOWer, measIndex = repcap.MeasIndex.Default, refLevel = repcap.RefLevel.Default)

Selects the reference level that is used for the measurement and for the indicated measurement source. Each source of the measurement can have its own reference level .

Parameters:

  • reference_level – UPPer | MIDDle | LOWer

  • measIndex – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Measurement’)

  • refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Cloning the Group

# Create a copy of the original group, that exists independently
refLevel_copy = driver.measurement.jitter.refLevel.clone()