X

SCPI Command :

ZONE<*>:AREA<*>:POINt<*>:X
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(zone=Zone.Default, area=Area.Default, point=Point.Default) → float[source]
# ZONE<*>:AREA<*>:POINt<*>:X
value: float = driver.zone.area.point.x.get(zone = repcap.Zone.Default, area = repcap.Area.Default, point = repcap.Point.Default)

Sets the horizontal X coordinates for the selected point of the area.

Parameters:

  • zone – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Zone’)

  • area – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Area’)

  • point – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Point’)

Returns:

x: -1E+26 to 1E+26

set(x: float, zone=Zone.Default, area=Area.Default, point=Point.Default) → None[source]
# ZONE<*>:AREA<*>:POINt<*>:X
driver.zone.area.point.x.set(x = 1.0, zone = repcap.Zone.Default, area = repcap.Area.Default, point = repcap.Point.Default)

Sets the horizontal X coordinates for the selected point of the area.

Parameters:

  • x – -1E+26 to 1E+26

  • zone – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Zone’)

  • area – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Area’)

  • point – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Point’)