Range

SCPI Command :

TRIGger:EVENt<*>:TIMeout:RANGe

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(evnt=Evnt.Default) → HiLowMode

# TRIGger:EVENt<*>:TIMeout:RANGe
value: enums.HiLowMode = driver.trigger.event.timeout.range.get(evnt = repcap.Evnt.Default)

Sets the relation of the signal level to the trigger level for the timeout trigger.

Parameters:

evnt – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Event’)

Returns:

timeout_mode: HIGH = stays high, the signal level stays above the trigger level. LOW = stays low, the signal level stays below the trigger level. EITHer = stays high or low.

set(timeout_mode: HiLowMode, evnt=Evnt.Default) → None

# TRIGger:EVENt<*>:TIMeout:RANGe
driver.trigger.event.timeout.range.set(timeout_mode = enums.HiLowMode.EITHer, evnt = repcap.Evnt.Default)

Sets the relation of the signal level to the trigger level for the timeout trigger.

Parameters:

• timeout_mode – HIGH = stays high, the signal level stays above the trigger level. LOW = stays low, the signal level stays below the trigger level. EITHer = stays high or low.

• evnt – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Event’)