Rate

SCPI Command :

TRIGger:EVENt<*>:SLEW:RATE

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(evnt=Evnt.Default) → float

# TRIGger:EVENt<*>:SLEW:RATE
value: float = driver.trigger.event.slew.rate.get(evnt = repcap.Evnt.Default)

For method RsMxo.trigger.event.slew.range.set() = INSRange and OUTRange, the slew rate defines the center of a range which is defined by the limits ±Delta. For method RsMxo.trigger.event.slew.range.set() = LTHan and GTHan, the slew rate defines the maximum and minimum slew rate limits, respectively. When the signal crosses this level, the slew rate measurement starts or stops depending on the selected slope (see method RsMxo.trigger.event.slew.slope.set() ) .

Parameters:

evnt – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Event’)

Returns:

time: 1E-10 to 10000

set(time: float, evnt=Evnt.Default) → None

# TRIGger:EVENt<*>:SLEW:RATE
driver.trigger.event.slew.rate.set(time = 1.0, evnt = repcap.Evnt.Default)

For method RsMxo.trigger.event.slew.range.set() = INSRange and OUTRange, the slew rate defines the center of a range which is defined by the limits ±Delta. For method RsMxo.trigger.event.slew.range.set() = LTHan and GTHan, the slew rate defines the maximum and minimum slew rate limits, respectively. When the signal crosses this level, the slew rate measurement starts or stops depending on the selected slope (see method RsMxo.trigger.event.slew.slope.set() ) .

Parameters:

• time – 1E-10 to 10000

• evnt – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Event’)