Stime

SCPI Command :

TRIGger:EVENt<*>:SETHold:STIMe

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(evnt=Evnt.Default) → float[source]

# TRIGger:EVENt<*>:SETHold:STIMe
value: float = driver.trigger.event.setHold.stime.get(evnt = repcap.Evnt.Default)

Sets the minimum time before the clock edge while the data signal must stay steady above or below the data level.

Parameters:: evnt – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Event’)
Returns:: setup_time: -9.9999E-08 to 1E-07

set(setup_time: float, evnt=Evnt.Default) → None[source]

# TRIGger:EVENt<*>:SETHold:STIMe
driver.trigger.event.setHold.stime.set(setup_time = 1.0, evnt = repcap.Evnt.Default)

Sets the minimum time before the clock edge while the data signal must stay steady above or below the data level.

Parameters:

setup_time – -9.9999E-08 to 1E-07
evnt – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Event’)