Cutoff

SCPI Commands :

TRIGger:ANEDge:CUToff:LOWPass
TRIGger:ANEDge:CUToff:HIGHpass

Commands in total: 2
Subgroups: 0
Direct child commands: 2

get_highpass() → AnalogCutoffFreq[source]

# TRIGger:ANEDge:CUToff:HIGHpass
value: enums.AnalogCutoffFreq = driver.trigger.anEdge.cutoff.get_highpass()

Frequencies below the cutoff frequency are rejected, higher frequencies pass the filter.

get_lowpass() → AnalogCutoffFreq[source]

# TRIGger:ANEDge:CUToff:LOWPass
value: enums.AnalogCutoffFreq = driver.trigger.anEdge.cutoff.get_lowpass()

Frequencies higher than the cutoff frequency are rejected, lower frequencies pass the filter.

set_highpass(analog_cutoff_hp: AnalogCutoffFreq) → None[source]

# TRIGger:ANEDge:CUToff:HIGHpass
driver.trigger.anEdge.cutoff.set_highpass(analog_cutoff_hp = enums.AnalogCutoffFreq.KHZ5)

Frequencies below the cutoff frequency are rejected, higher frequencies pass the filter.

set_lowpass(analog_cutoff_lp: AnalogCutoffFreq) → None[source]

# TRIGger:ANEDge:CUToff:LOWPass
driver.trigger.anEdge.cutoff.set_lowpass(analog_cutoff_lp = enums.AnalogCutoffFreq.KHZ5)

Frequencies higher than the cutoff frequency are rejected, lower frequencies pass the filter.