Waveform

SCPI Command :

SYNChronize:LOAD[:WAVeform]

Commands in total: 1

Subgroups: 0

Direct child commands: 1

set() → None

# SYNChronize:LOAD[:WAVeform]
driver.synchronize.load.waveform.set()

Retrieves the waveforms of the latest acquisition from the connected oscilloscope. All selected analog channel waveforms are transferred. Digital channels and reference waveforms are not transferred.

set_and_wait(opc_timeout_ms: int = -1) → None

# SYNChronize:LOAD[:WAVeform]
driver.synchronize.load.waveform.set_and_wait()

Retrieves the waveforms of the latest acquisition from the connected oscilloscope. All selected analog channel waveforms are transferred. Digital channels and reference waveforms are not transferred.

Same as set, but waits for the operation to complete before continuing further. Use the RsMxo.utilities.opc_timeout_set() to set the timeout value.

Parameters:

opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.