Mode

SCPI Command :

REFLevel<*>:RELative:MODE

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(refLevel=RefLevel.Default) → RelativeLevels

# REFLevel<*>:RELative:MODE
value: enums.RelativeLevels = driver.refLevel.relative.mode.get(refLevel = repcap.RefLevel.Default)

The lower, middle and upper reference levels, defined as percentages of the high signal level.

Parameters:

refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)

Returns:

relative_levels: FIVE | TEN | TWENty | USER

• FIVE: 5/50/95

• TEN: 10/50/90

• TWENty: 20/50/80

• USER: Set the reference levels to individual values with REFLevelrl:RELative:LOWer, REFLevelrl:RELative:MIDDle, and REFLevelrl:RELative:UPPer.

set(relative_levels: RelativeLevels, refLevel=RefLevel.Default) → None

# REFLevel<*>:RELative:MODE
driver.refLevel.relative.mode.set(relative_levels = enums.RelativeLevels.FIVE, refLevel = repcap.RefLevel.Default)

The lower, middle and upper reference levels, defined as percentages of the high signal level.

Parameters:

• relative_levels –

  FIVE | TEN | TWENty | USER

  • FIVE: 5/50/95

  • TEN: 10/50/90

  • TWENty: 20/50/80

  • USER: Set the reference levels to individual values with REFLevelrl:RELative:LOWer, REFLevelrl:RELative:MIDDle, and REFLevelrl:RELative:UPPer.

• refLevel – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefLevel’)