Offset

SCPI Command :

REFCurve<*>:RESCale:VERTical:OFFSet

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(refCurve=RefCurve.Default) → float

# REFCurve<*>:RESCale:VERTical:OFFSet
value: float = driver.refCurve.rescale.vertical.offset.get(refCurve = repcap.RefCurve.Default)

The vertical offset moves the reference waveform vertically. Enter a value with the unit of the waveform. Like vertical offset of a channel waveform, the offset of a reference waveform is subtracted from the measured value. Negative values shift the waveform up, positive values shift it down.

Parameters:

refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)

Returns:

offset: -100000000 to 100000000

set(offset: float, refCurve=RefCurve.Default) → None

# REFCurve<*>:RESCale:VERTical:OFFSet
driver.refCurve.rescale.vertical.offset.set(offset = 1.0, refCurve = repcap.RefCurve.Default)

The vertical offset moves the reference waveform vertically. Enter a value with the unit of the waveform. Like vertical offset of a channel waveform, the offset of a reference waveform is subtracted from the measured value. Negative values shift the waveform up, positive values shift it down.

Parameters:

• offset – -100000000 to 100000000

• refCurve – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RefCurve’)