Start

SCPI Command :

POWer<*>:SWITching:REGion:TOTal[:STARt]

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(power=Power.Default) → float

# POWer<*>:SWITching:REGion:TOTal[:STARt]
value: float = driver.power.switching.region.total.start.get(power = repcap.Power.Default)

Sets the start time for the turn on area in relation to the trigger point. This value is also the start time of the total switching cycle.

Parameters:

power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)

Returns:

t_1_position: -500 to 500

set(t_1_position: float, power=Power.Default) → None

# POWer<*>:SWITching:REGion:TOTal[:STARt]
driver.power.switching.region.total.start.set(t_1_position = 1.0, power = repcap.Power.Default)

Sets the start time for the turn on area in relation to the trigger point. This value is also the start time of the total switching cycle.

Parameters:

• t_1_position – -500 to 500

• power – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Power’)